10F065C08
250W Continuous program power
57-4KHz Frequency range
65.5mm Voice coil
96dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
10 inch
-
8 ohm
-
500 watts
-
250 watts
-
96 dB
-
57-4 KHz
-
255 mm
-
5.2 ohm
-
65.5 mm
-
CU
-
15.5 mm
-
2
-
Out
-
8
-
156*20 mm
- Fs
57 Hz
- Rte
5.2 ohm
- Qms
9.44
- Qes
0.37
- Qts
0.35
- BL
15.35 T-m
- Mms
46.61 g
- Vas
31.06 liters
- Sd
363.05 m²
- Xmax
3.8 mm
- Eff
1.49 %
-
256 mm
-
241.5 mm
-
5 mm
-
228 mm
-
120 mm
-
2.93 kg
-
3.4 kg(1PCS/CTN)
-
285*285*150 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message