08F050C23
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
8 inch
-
8 ohm
-
300 watts
-
150 watts
-
94 dB
-
70-5.0 KHz
-
165 mm
-
6.3 ohm
-
49.5 mm
-
PEPSW
-
11.6 mm
-
2
-
Out
-
6
-
134*18 mm
- Fs
70 Hz
- Rte
6.0 ohm
- Qms
7.77
- Qes
0.41
- Qts
0.389
- BL
12.308 T-m
- Mms
21.89 g
- Vas
16.47 liters
- Sd
226.98 m²
- Xmax
28 mm
- Eff
1.41 %
-
210 mm
-
197 mm
-
5.6 mm
-
182.0 mm
-
102.0 mm
-
2.9 kg
-
4.2 kg(4PCS/CTN)
-
425*230*280 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message